POWER SUPPLY

    DIN RAIL POWER SUPPLY

    Technical and functional characteristics

    These power supplies are designed according to the flyback converter principle. The output voltage remains at mains voltage fluctuations and at load variations within a tolerance of ± 3%.

    No minimum load required. The equipment starts regularly in all the rated input ranges with zero load on the output, while maintaining the output voltage within 0,5 % of the rated output voltage.

    No Hiccup-mode during overload or short circuit. The equipment works regularly in constant current mode ...during overload up to full short circuit. This ondition can be maintained indefinitely without any damage or performance degradation. This feature helps starting loads with high inrush current or great capacitive load.

    High stability (high open loop bandwidth and phase margin). This feature shows the very good action of the equipment with rapidly changing load (from zero to max load and vice versa) and during start up, without ringing and overshoot.

    Operating-condition signalling. On all our products a led provides the optical indication of the output voltage: good operation, overload condition, short circuit condition. 

     

    TECHNICAL DATA+

     

    • Safety Standard EN60950 – UL508
    • EMC Standard  EN55022/B - EN61000-4
    • CE European Directives CE 2006/95/ECC - 89/336
    • Degree of protection IP 20
    • MTBF (MIL HDBK217) ~ 100'000 h
    • Service condition -10°C / +50°C
    • Relative humidity (non-condensing) 5% ÷ 90%
    • Overload / Short circuit / Over voltage protection Electronic
    • Operating LED
    • Coloure grey RAL 7035 

     

    PSM2/18.12
    _
    Nominal input voltage
    100 – 240 Vac
    _
    Nominal frequency
    48 - 63 Hz
    _
    No load input power
    0,4 – 0,5 W
    _
    Nominal output voltage
    12 Vdc
    _
    Output voltage
    precision ±3 %
    _
    Adjustable output
    voltage 12-14Vdc
    _
    Nominal output
    current 1,5A
    _
    Nominal power 18 W
    _
    Limitation current
    1,9 A
    _
    Short circuit current
    2,5 A
    _
    Efficiency 80 - 85 %
    _
    Housing DIN rail REG 2TE
    ________________________
    Suitable for
    - EIBPORT,
    - CUBEVISIONMODULE,
    - DATALOGGER,
    - KNXCONVERTER,
    - EIBNODE,
    - DUODMX GATEWAY,
    - AUDIOMODULE LINE,
    - APPMODULE,
    - LINKMODULE,
    - ELMMODULE
    PSM4/72.24
    _
    Nominal input voltage
    230 Vac +/- 10%
    _
    Nominal frequency
    48 - 63 Hz
    _
    No load input power
    0,9 W
    _
    Nominal output voltage
    24 Vdc
    _
    Output voltage
    precision ±3 %
    _
    Adjustable output
    voltage 24-28 Vdc
    _
    Nominal output
    current 3 A
    _
    Nominal power 72 W
    _
    Limitation current
    4,4 A
    _
    Short circuit current
    4,7 A
    _
    Efficiency 90 %
    _
    Housing DIN rail REG 4TE
    ________________________
    Suitable for
    - AUDIOMODULE SPEAKER
    PSM4/96.24
    _
    Nominal input voltage
    230 Vac +/- 10%
    _
    Nominal frequency
    48 - 63 Hz
    _
    No load input power
    0,9 W
    _
    Nominal output voltage
    24 Vdc
    _
    Output voltage
    precision ±3 %
    _
    Adjustable output
    voltage 24-28 Vdc
    _
    Nominal output
    current 4 A
    _
    Nominal power 96 W
    _
    Limitation current
    4,4 A
    _
    Short circuit current
    4,7 A
    _
    Efficiency 90 %
    _
    Housing DIN rail REG 4TE
    ________________________
    Suitable for
    - UP TOUCH PANEL PCs
    PSM6/120.24
    _
    Nominal input voltage
    230 Vac +/- 10%
    _
    Nominal frequency
    48 - 63 Hz
    _
    No load input power
    0,95 W
    _
    Nominal output voltage
    24 Vdc
    _
    Output voltage
    precision ±3 %
    _
    Adjustable output
    voltage 24-28 Vdc
    _
    Nominal output
    current 5 A
    _
    Nominal power 120 W
    _
    Limitation current
    6,3 A
    _
    Short circuit current
    7,5 A
    _
    Efficiency 90 %
    _
    Housing DIN rail REG 6TE
    ________________________
    Suitable for
    - AUDIOAMP

     

    Continuous input voltage. These power supplies also accept a continuous input voltage:
    - from 280Vdc to 350Vdc for models with 230Vac input voltage
    - from 130Vdc to 350Vdc for « full range » models (100-240Vac) 

     

    NOTICE

     

    ART.-NR.+
    • 35421 - Power Supply PSM2/18.12
    • 35423 - Power Supply PSM4/72.24
    • 35424 - Power Supply PSM4/96.24
    • 35422 - Power Supply PSM6/120.24
    DOWNLOAD+
    • POWER SUPPLY PSM2/18.12 EN
    • POWER SUPPLY PSM4/72.24 EN
    • POWER SUPPLY PSM4/96.24 EN
    • POWER SUPPLY PSM6/120.24 EN